9" IPS MONITOR
Bright, clear, and easy to see from any angle.
Bright, clear, and easy to see from any angle.
Keeps the image upright so you always see the truth.
Magnifies the image up to 5× for a closer look at fine details.
Tracks the cable distance in real time to help locate pipe issues accurately.
See the real cause of the clog before you dig or call a plumber.
Stop guessing and stop spending on unnecessary repairs.
Capture photos and video for insurance, tenants, and reports.
—DIAGNOSE PROBLEMS IN MINUTES
Inspect long service lines through exterior cleanouts before excavation.
Diagnose recurring blockages in shared building drains and mains.
Find grease, debris and damaged joints through proper clean out access.
Inspect longer, straighter runs and locate the camera from above ground.
Inspect longer storm lines for silt, debris and displaced joints.
Record clear proof that the line is open and clean.
Large wheels and a telescopic handle make the complete inspection system easier to move between jobs.
Add on-screen notes, capture photos and record inspection footage to a TF card.
The 7 mm fiberglass push cable delivers the reach and pushing strength needed for long drain and sewer runs.
See the problem, locate its position and plan targeted repairs with less unnecessary excavation.
Long-Range Sewer Inspection
Best for: Plumbers and repair jobs that require surface location before excavation.
Best for: Customers who already own a compatible 512Hz receiver or only need recorded visual inspection.
PW9DA
$949.99
PW10DZ
$1,489.99
View PW10DZ
PW9D2
$429.00
View PW9D2
PW9D1
$372.95
View PW9D1
Camera spring twisted on 1st use. Make sure to set date and time, otherwise the recordings wont save. Other than the spring issue the camera has worked well... I've taped by sewer jetter to this camera to make a poor man's drain cleaner... had one rental with water backups... found the issue right away with this camera and used the letter hose (hooked to normal pressure washer) to cut away at the roots and dirt to get the line flowing again!
Works great for the price, but it did not work out of box! the internal battery had broken off is solder pad and only worked while plugged in to AC. But I was able to rip box apart and solder battery lead back on to board. Now it works great. BTW I am a licensed Master Plumbing Contractor in FL USA. minus 1 star because of shipping or needs better design to keep battery from breaking free.
camera image quality is great. cable is a bit soft you need to be careful with it. cable has markers in metres which helps in measurement of distance an locating head . 512hz frequency is accurate. easy use out of the box . should be used only with 4 inch pipes and upwards.
Excellent camera. Did a great job.
Reduced diagnostic time by 70%. Clear imaging helps us give accurate quotes to clients instantly.
Withstands daily professional use. Worth the investment for any serious plumbing business.
Tough cable handles daily abuse. Been using mine for 8 months through all kinds of nasty pipes - still going strong.
Works great very clear video and love the distance counter.
I have been using this camera a couple times a week for the past several months, and here is my honest take.
Great camera... does everything I need! Definitely recommend 100%.
PRODUCT QUESTIONS
Check pipe fit, understand the features, and get support for your order.
Pipe size, bends and usable reach
Yes, a 2-inch straight drain meets the 1¼-inch minimum recommendation for this 23 mm camera head. For a long-sweep 90° bend, the guide recommends 2 inches or larger; a short-radius 90° bend is not recommended. Check the pipe’s actual inside diameter and the widest part of the complete camera assembly. Covers and centering guides need extra clearance, and passage through any bend is not guaranteed.
Check my pipe setupFor long-sweep 90° bends, 2-inch or larger pipe is recommended. Short-radius 90° bends are not recommended. Advance slowly through a long-sweep bend and stop if resistance increases. Check the actual pipe inside diameter and the full camera assembly, including any guide; bend passage is never guaranteed.
Use a suitable cleanout rather than pushing through fixture traps. Kitchen sink P-traps, shower traps and the trap inside an installed toilet are not suitable entry routes for this system. If no usable cleanout is available, have a plumber assess another access point and the pipe route.
The PW9DA has a 165 ft / 50 m cable, but usable reach can be shorter. Bends, buildup and the entry point all affect how far it can travel. Estimate the pipe route from your access point, not the straight-line distance across the property.
Stop pushing. Never use the camera to force open a blockage. If the cable moves freely, ease it back without sharp bends. Check for a more suitable entry point. If it is trapped or pulling increases resistance, stop and contact support or a drain professional.
Get help with a stuck cameraRecurring clogs and what you can see
It can help you check for visible causes such as remaining buildup, root intrusion or a damaged joint in the accessible part of the line. Record what you find before deciding on more cleaning or a repair. The camera inspects the pipe; it does not clear the blockage.
Yes—when the camera can reach the area and the pipe wall is visible. It can document these conditions, but heavy deposits or standing water may hide defects. It cannot see beyond an obstruction or prove that an apparently intact pipe is leak-free.
Before cleaning, an inspection may show what is restricting the line. If a blockage prevents safe access or a useful view, cleaning may be needed first. An inspection afterward helps document the visible result. Remove the camera before operating drain-cleaning equipment.
Not necessarily. Cloudy water, sewage and debris can block the view even when the camera head is working. Brighter LEDs do not make opaque water transparent. The line may need to be cleared before you can get a useful view of the pipe wall.
Sonde, receiver, counter and footage
You can view and record the pipe without a locator. Add a compatible 512Hz sonde receiver when you also need to find the camera head from above ground. The receiver detects the head’s signal; it does not automatically map the entire pipe. Locating accuracy depends on site conditions.
Both PW9DA configurations have a built-in 512Hz sonde. The “With 512Hz Locator” option also includes the handheld receiver; the “512Hz Sonde Transmitter” option does not. If you already own a compatible 512Hz sonde receiver, you may not need another one.
No. The counter estimates how much cable has been fed from the reference point. It does not give the camera’s burial depth or its position on the ground. For above-ground locating, use the camera’s sonde with a compatible receiver.
Yes. The PW9DA records inspection footage to a memory card. Copy the saved files to a computer for review and sharing. For useful job records, identify the property, access point and inspection date, and keep notes of any relevant distance readings.
Self-leveling helps keep the displayed pipe image upright as the camera head rotates. It does not steer the head or help it force its way around a bend. Pipe access and bend limits still apply.
Cleaning, replacement parts and repairs
No. The IP68 rating applies to the camera head, not the entire system. Keep the monitor, control unit, battery and connectors dry. After use, power off, wipe the cable and clean the lens as directed in the manual, then let parts dry before storage. Do not hose down the complete system.
Read the PW9DA manual (opens in a new tab)A replacement head or compatible cable/reel assembly may be an option, depending on the model and the damage. Send us your order number, model and photos of the part and connector. Confirm compatibility and the recommended repair before buying parts or taking the system apart.
Ask about replacement partsPowerwill provides a one-year limited warranty from delivery, subject to the warranty terms, with service support in Texas. For an issue, send your order details and photos or video to our support team. Get return authorization before shipping a unit for inspection or repair.
View warranty & repair termsDelivery, returns and optional Seel protection
In-stock PW9DA orders are currently listed to ship within 1–2 days. This is a dispatch estimate, not a delivery guarantee. Transit time depends on your destination and shipping method. For a time-sensitive job, ask us to confirm timing for your ZIP code before ordering.
Confirm delivery timingOrdering outside the U.S.? Contact us with the model, destination country and postal code so we can confirm whether delivery is available and quote shipping. Ask about estimated transit time and any duties or taxes before placing the order.
Ask about international shippingReturns require approval and must meet our 30-day return policy. Items must be unused and in their original condition and packaging. Sale-item and other exclusions apply. Return shipping for a change of mind is the buyer’s responsibility. Contact us before shipping anything back.
Check return eligibilityIt is an optional, paid add-on for eligible delivery issues. Depending on the coverage offered with your order, this may include loss, theft, transit damage or significant delays. Check the fee and terms before paying. It is separate from Powerwill’s product warranty, and you can remove it before checkout is completed.
View Seel coverage & FAQs (opens in a new tab)Check your Seel confirmation email or open the Seel Resolution Center with your order number and the email used at checkout. For damage, keep the packaging and take photos. Reporting deadlines and compensation depend on your plan. For a product fault unrelated to delivery, contact Powerwill Support.
Check coverage or start a claim (opens in a new tab)
3–7 Business Days
Hassle-Free
Parts & Labor
Texas Service Center
SSL Encrypted
Maintain upright images and professional results with the Powerwill Self-Leveling Camera Head. Its precision balancing mechanism keeps video steady...
Ver todos los detallesPlease Note: Please leave us a message and send a picture of the camera head before ordering to make sure the camera is compatible with your sew...
Ver todos los detallesSKU: 10D-CHARGER-12V-US Compatible with: PW10DX1, PW10DZ, 10DA Replacement part for Powerwill sewer inspection camera systems Reference title: Se...
Ver todos los detallesDraft product for catalog review. SKU: 10DX-BATT-12V4500 Compatible with: Compatible Powerwill pipe inspection camera systems Replacement pa...
Ver todos los detallesSKU: 10D-CONNECTION-CABLE Compatible with: PW10DX1, PW10DZ, 10DA Replacement part for Powerwill sewer inspection camera systems Reference title: ...
Ver todos los detalles{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}
Seleccione el primer artículo para comparar
Seleccione el segundo artículo para comparar
Seleccione el tercer elemento para comparar